Troubleshooting • problems with usb wifi adapter and usb camera
hello everybody,i have a 3d printer running klipper that used to be controlled by a notebook. the notebook wasn't behaving reliably (random freezes) so a friend gave me a raspberry pi 3b with faulty...
View ArticleClik here to view.
General discussion • Several ADC's - One RPi4b?
I have an ADC (Analog to Digital Converter) and it's connected to my RPi4b via the I2C bus.Is it possible to connect more than one ADC to the RPi? How is this done?Can two ADC's from the same company...
View ArticleTroubleshooting • [Solved] Zero2W stalls on upgrade - bookworm
I have 2 Zero2Ws and both did the same thing when I upgraded them this morning. I did an Code: apt update ; apt upgrade and it gets all the way to building the initramfs then halts. These Pis are both...
View ArticleTroubleshooting • Ethernet connection stopped working
Greetings;What could be the cause of the ethernet connections suddenly not working any more:My router is offering an IP address, when I connect the cable, but it doesn't bind. The lights on the RJ45...
View ArticleTroubleshooting • Raspberry Pi 4: Python - RuntimeError: Error waiting for edge
I am trying to get the falling edge of a HB100 doppler radar with a Lm358 amplifier module.The error is RuntimeError: Error waiting for edgeIt was working great and stopped suddenly.I have already...
View ArticleTroubleshooting • Is the Raspberry Pi 5 power (in)efficient?
Hello, I got a new Raspberry Pi 5 8GB and installed Raspberry Pi OS Bookworm 64-bit on it.I'm quite surprised at the heat this thing generates! It wears the original case with its small heatsink and...
View ArticleTroubleshooting • Pi Zero W successfully boots only 1 out of about 10 times...
I have a Raspberry Pi Zero W that very sporadically successfully boots, about 1 out of 10 times, after applying power. When successful the LED flashes randomly while booting and I get the R Pi logo...
View ArticleBeginners • Two home folders visible on Mac, only one user.
I created the image for my zeros with the Raspberry Pi Imager app on Mac, and created an account with my name. Now unfortunately I can't remember how I enabled the network share of the home folder,...
View ArticleAdvanced users • display panel kernel compile error
I'm trying to compile a custom kernel, the display panel compiles fine in 6.1 but fails with kernel 6.6 with the following error.Code: drivers/gpu/drm/panel/panel-cwd686.c: In function...
View ArticleGeneral • Pico to run multiple LED's with input buttons
Hi all,First of all, I hope this is posted in the right area of the forum... my apologies if not!Some background about the project I am hoping to work on. It's my Son's birthday coming up soon and I...
View ArticleTroubleshooting • Display issues with RPI 4
Recently got RPI 4 and I tried booting it on 3 displays and none of them seem to show image(I tested it before buying and it was showing OS just fine on the display tested). Since then I reinstalled...
View ArticleOther projects • How to configure button for keyboard key
New to RPI. I am running Adafruit Looper on RPI 2b for kiosk. Need to configure GPIO pins for momentary switch to enter "k" which cycles mp4s in Looper. How do I go about doing this? Thanks for any...
View ArticleAdvanced users • Booting NVMe on Dual NVMe board
I have just installed a Pimoroni NVMe Base Duo w/two 500GB disks (ASM1182e). I updated the firmware to version Sat 20 Apr 2024 and then used the HTTP installer with no SD Card or USB disk installed....
View ArticleNederlands • Camera installatie
Hall ik ben in het bezit van eenPrusa 3d printer met daaraangekoppeld een Hallo,ik ben in het bezit van een Prusa 3d printer met daaraangekopped een Raspberry pi 4 om octoprint daarop te draaien, ook...
View ArticleGeneral discussion • Gin Rummy
hi. just wondering, as i can't seem to find one, is there a decent GIN RUMMY game i could download on my rpi 5?thanks.Statistics: Posted by DinksDad — Sat Apr 27, 2024 3:26 pm — Replies 0 — Views 42
View ArticleBeginners • Starting a cluster, How do I get software to run?
Newbie Alert! I had recently acquired 6 RPi 3B1.2's of which 5 are assembled to a cluster, the 6th just got its 515-Lite sinks, and running asingle task. I've got each of the cluster nodes running...
View ArticleClik here to view.
For sale • Industrial CM4 board
Hello. I am analyzing if there is a need for such a CM4 base board. The current set of interfaces is very common and there are plenty of options. However, there might be special requirements that...
View ArticleClik here to view.
HATs and other add-ons • Raspberry Pi Active Cooler
Is the Raspberry Pi Active Cooler the most efficient cooler? Or is there better options on the after market?My thoughts are if there is a more efficient active cooler and at the same time quieter and...
View ArticleOther projects • Camera Module 3 with Rasp. Zero Does not WORk
hello,I've bought a Camera Module ( 3) to set it on my Raspberrypi Zero with the official adaptator. The first probleme I had is that it wasn't working. I could'nt activate the module on raspi-config...
View ArticleNetworking and servers • GigE industrial camera making the whole system slow
Hi all.I’m working on a project to build an independent camera system based on an old CCD 1080p GigE camera module, a Pi5 and a battery. The camera is a Basler Aviator that I’ve been testing on a...
View Article