Other • Help needed, install Waveshare 2.8inch DSI on Pi 3B+ Mainsail

Code:

pi@pi:~ $ rm -r -f Waveshare*pi@pi:~ $ git clone https://github.com/waveshare/Waveshare-DSI-LCD && cd Waveshare-DSI-LCDCloning into 'Waveshare-DSI-LCD'...remote: Enumerating objects: 529, done.remote: Counting objects: 100% (529/529), done.remote: Compressing objects: 100% (358/358), done.remote: Total 529 (delta 282), reused 397 (delta 154), pack-reused 0 (from 0)Receiving objects: 100% (529/529), 567.27 KiB | 4.85 MiB/s, done.Resolving deltas: 100% (282/282), done.pi@pi:~/Waveshare-DSI-LCD $ uname -m -r6.18.50+rpt-rpi-v8 aarch64pi@pi:~/Waveshare-DSI-LCD $ ls5.10.103  5.15.61  5.15.84  6.1.21  6.1.63  6.6.20  Backlight     README.md5.10.92   5.15.76  6.1.0    6.1.58  6.1.73  6.6.51  README_CN.mdpi@pi:~/Waveshare-DSI-LCD $ cd 6.18.50/64-bash: cd: 6.18.50/64: No such file or directorypi@pi:~/Waveshare-DSI-LCD $ cd 6.6.51/64pi@pi:~/Waveshare-DSI-LCD/6.6.51/64 $ sudo bash ./WS_xinchDSI_MAIN.sh 28 I2C0[sudo] password for pi:SCREEN_type=0,I2C_bus=10The raspberry PI hardware platform is pi3Driver Start SettingsModprobing ilitekmodprobe: ERROR: could not insert 'ilitek': Exec format errorModprobing WS_xinchDSI_Screen_Interfacemodprobe: ERROR: could not insert 'WS_xinchDSI_Screen_Interface': Exec format errorModprobing WS_xinchDSI_Screenmodprobe: ERROR: could not insert 'WS_xinchDSI_Screen': Exec format errorModprobing WS_xinchDSI_Touch_Interfacemodprobe: ERROR: could not insert 'WS_xinchDSI_Touch_Interface': Exec format errorModprobing WS_xinchDSI_Touchmodprobe: ERROR: could not insert 'WS_xinchDSI_Touch': Exec format errorIt already exists and does not need to be addedIt already exists and does not need to be addedIt already exists and does not need to be addedIt already exists and does not need to be addedIt already exists and does not need to be addedIt already exists and does not need to be addedDriver end Settingspi@pi:~/Waveshare-DSI-LCD/6.6.51/64 $