Hello members:
I have damaged one end of a 0603 resistor on the bottom side of the PCB during assembly with an additional Geekworm PCB (see picture). Now only the fan is working and the red LED is lit, but the green LED for data transfer is no longer lit and the PI does not boot. I tried to resolder the damaged resistor cap but without an effect. Now I would like to replace the resistor, but its R value cannot be measured when installed. Does anyone know the hardware details (circuit diagram, component layout) so that I can buy a suitable resistor?
Many thanks for your help in advance
Stefan.
I have damaged one end of a 0603 resistor on the bottom side of the PCB during assembly with an additional Geekworm PCB (see picture). Now only the fan is working and the red LED is lit, but the green LED for data transfer is no longer lit and the PI does not boot. I tried to resolder the damaged resistor cap but without an effect. Now I would like to replace the resistor, but its R value cannot be measured when installed. Does anyone know the hardware details (circuit diagram, component layout) so that I can buy a suitable resistor?
Many thanks for your help in advance
Stefan.
Statistics: Posted by Stefan - Germany — Tue Jan 06, 2026 4:33 pm — Replies 2 — Views 80