Hello, got a pi 5 and been using it for 4 days via usb drive.
Tried to change the boot priority from usb drive to nvme, but somehow broke the eeprom when trying to revert it (reverting because messed up the nvme config that make it not bootable).
Now it won't boot from any, only give solid green led and blank screen (no signal).
I tried recovery eeprom via sd card but always failed with 4 long blinks and 5 short blinks (fatal firmware error) and red screen.
tried 3 different sd card. using the 27w adapter too.
maybe i touch something when removing the nvme while the pi 5 still on power, i'm not sure.
is it a hardware failure or is there anything i can do more?
Tried to change the boot priority from usb drive to nvme, but somehow broke the eeprom when trying to revert it (reverting because messed up the nvme config that make it not bootable).
Now it won't boot from any, only give solid green led and blank screen (no signal).
I tried recovery eeprom via sd card but always failed with 4 long blinks and 5 short blinks (fatal firmware error) and red screen.
tried 3 different sd card. using the 27w adapter too.
maybe i touch something when removing the nvme while the pi 5 still on power, i'm not sure.
is it a hardware failure or is there anything i can do more?
Statistics: Posted by xiaukia1 — Mon Sep 22, 2025 10:01 pm — Replies 3 — Views 167