Hello,
I've been experimenting with building an ads-b receiver.
While using a raspberry pi 4 i was able to get 420 km of range, when using my raspberry pi zero 2w, not only the maximum range decreased to around 300, i also don't get the same coverage.
Hardware wise everything is the same except from the pis and the software configuration is exactly the same.
During normal use zero 2w stays at ~8% CPU usage and 50% ram usage. Any ideas what could be causing the reduction in sensitivity?
Thank you.
I've been experimenting with building an ads-b receiver.
While using a raspberry pi 4 i was able to get 420 km of range, when using my raspberry pi zero 2w, not only the maximum range decreased to around 300, i also don't get the same coverage.
Hardware wise everything is the same except from the pis and the software configuration is exactly the same.
During normal use zero 2w stays at ~8% CPU usage and 50% ram usage. Any ideas what could be causing the reduction in sensitivity?
Thank you.
Statistics: Posted by Petrosz1 — Sun Mar 02, 2025 6:53 pm — Replies 1 — Views 19