I have a RPi 4B 8GB RAM installed on an Argon One V2 case, everything works fine, I can boot from the SD card or USB drive.
Now I have added the Argon NVMe case add-on with an SSD disk. I have booted from a regular USB disk (with OS Lite) with the Raspberry Pi OS Desktop, then I run the Imager to load an OS Lite Image on the NVMe SSD disk, everything went fine and completed OK.
Then I removed the USB drive and allowed it to boot again, now ONLY with the NVMe SSD disk I just imaged. Nothing happens, the boot loader screen shows up (the new one with pink and white colors) and it says trying to boot from USB-MSD and will stay there forever, any idea why is not booting from the NVMe disk or what I should do to fix it?
Thanks
Now I have added the Argon NVMe case add-on with an SSD disk. I have booted from a regular USB disk (with OS Lite) with the Raspberry Pi OS Desktop, then I run the Imager to load an OS Lite Image on the NVMe SSD disk, everything went fine and completed OK.
Then I removed the USB drive and allowed it to boot again, now ONLY with the NVMe SSD disk I just imaged. Nothing happens, the boot loader screen shows up (the new one with pink and white colors) and it says trying to boot from USB-MSD and will stay there forever, any idea why is not booting from the NVMe disk or what I should do to fix it?
Thanks
Statistics: Posted by br_web — Tue Nov 26, 2024 4:09 pm — Replies 0 — Views 15