Hi,
I am using a Hailo 8 (26 TOPS) M.2 module with the official M.2 HAT+ and it is not working. Below are my terminal logs. If someone could help me out, I would really appreciate it. I am new to AI on Pi.
Also, I am following this: https://www.raspberrypi.com/documentati ... rs/ai.html
I am using a Hailo 8 (26 TOPS) M.2 module with the official M.2 HAT+ and it is not working. Below are my terminal logs. If someone could help me out, I would really appreciate it. I am new to AI on Pi.
Code:
aravhawk@raspberrypi:~ $ lspci0000:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)0000:01:00.0 Co-processor: Hailo Technologies Ltd. Hailo-8 AI Processor (rev 01)0001:00:00.0 PCI bridge: Broadcom Inc. and subsidiaries BCM2712 PCIe Bridge (rev 21)0001:01:00.0 Ethernet controller: Raspberry Pi Ltd RP1 PCIe 2.0 South Bridgearavhawk@raspberrypi:~ $ rpicam-hello -t 0 --post-process-file ~/rpicam-apps/assets/hailo_yolov6_inference.json --lores-width 640 --lores-height 640[0:18:06.232551868] [2030] INFO Camera camera_manager.cpp:325 libcamera v0.3.2+27-7330f29b[0:18:06.244943114] [2036] INFO RPI pisp.cpp:695 libpisp version v1.0.7 28196ed6edcf 29-08-2024 (16:33:32)[0:18:06.266859160] [2036] INFO RPI pisp.cpp:1154 Registered camera /base/axi/pcie@120000/rp1/i2c@88000/imx708@1a to CFE device /dev/media0 and ISP device /dev/media1 using PiSP variant BCM2712_C0Made X/EGL preview windowPostprocessing requested lores: 640x640 BGR888Reading post processing stage "hailo_yolo_inference"ERROR: *** No such node (hef_file) ***Statistics: Posted by aravhawk — Sun Nov 03, 2024 3:00 pm — Replies 0 — Views 27
